What is bloom drift, and why does it matter for intake timing?

A bloom doesn't sit still. Once cyanobacteria start forming a mat near the surface, wind, inflow currents, and thermal stratification push that mat around the reservoir, sometimes a few hundred feet overnight, sometimes across a whole arm of the lake in two or three days. Operators call this bloom drift, and if you manage a source water intake, it's the gap between "there's a bloom somewhere in the reservoir" and "there's a bloom at my crib."
That gap is where most of the bad surprises live.
How a bloom actually moves across a reservoir
Cyanobacteria aren't rooted to the spot where they started. Many species control their buoyancy with gas vesicles, rising and sinking through the water column over the course of a day depending on light and nutrient conditions. On top of that vertical movement, wind pushes surface scums downwind, piling cells up against a shoreline or a dam face. A bloom that started on the north shore because of a tributary nutrient load can end up stacked against your intake tower two days later just because the wind shifted out of the north for a stretch.
Reservoir geometry matters too. Narrow arms and coves concentrate scum the way a funnel does. If your intake sits near a point where the lake narrows, or downwind of the prevailing summer wind direction, you're sitting in a natural collection zone whether the bloom started near you or not.
This is different from bloom growth. Growth is about nutrient load, temperature, and light driving cell counts up. Drift is about where those cells end up once they're there. A small bloom that drifts straight at your crib is a bigger operational problem than a large bloom that stays pinned against a far shoreline.
Why drift timing changes your intake math
Most utilities don't have the luxury of shutting an intake down the moment a bloom is reported anywhere in the watershed. You need to know whether it's headed your way, and roughly how fast, so you can decide between a few real options: pull from a different depth, switch to an alternate intake if you have one, step up treatment ahead of the plant, or start the notification process for a precautionary advisory.
Each of those takes lead time. Adjusting intake depth or switching sources is a plant operations decision that someone has to sign off on, often with notice to a board or a state drinking water program. A public notice has its own clock, communications review, state coordination, posting requirements. If the first indication you get that a bloom is near the intake is a visible scum at the crib or a taste-and-odor complaint, you're already working the short clock, not the long one.
That's the real cost of not tracking drift. You find out about the bloom at the point where your choices have already narrowed down to the expensive ones.
Building lead time into your shutdown plan
A workable shutdown plan needs a trigger that fires while the bloom is still approaching the intake. That means tracking bloom extent and position across the whole reservoir surface on a regular cadence, checking often enough during the season to catch a two-day drift before it reaches the crib.
Field sampling alone struggles here. A crew can get good cell counts at a handful of fixed points, but a bloom drifting in from a cove nobody samples won't show up until it arrives. A daily satellite read of the whole reservoir surface catches that kind of movement while it's still a few hundred yards out, which is the difference between an operations memo and an emergency call.
If your current bloom tracking tells you a bloom exists but stops short of showing where it's heading, fix that before the next bloom season starts. Algal Bloom Warning gives you a daily bloom-extent flag and a short trend note through the season, built for exactly this kind of lead-time decision.