Cyanobacteria index vs. chlorophyll-a: what's the difference?

A wide reservoir under a cloudy sky, with wooded hills along the far shoreline.

If you've pulled satellite data on your reservoir before, you've probably seen both terms thrown around like they mean the same thing. They don't, and mixing them up is how a source water program ends up issuing a notice for a bloom that was never going to make toxin, or missing one that was.

Chlorophyll-a is the older, more familiar number. It's the green pigment every plant and algae cell uses to photosynthesize, so a chlorophyll-a reading is a stand-in for total phytoplankton biomass in the water column. Labs have run chlorophyll-a as a trophic status indicator for decades, usually reported in micrograms per liter. The problem for anyone managing a drinking water intake is that chlorophyll-a can't tell species apart. A chlorophyll-a spike could be a diatom bloom that's completely harmless to your treatment process, or it could be a cyanobacteria bloom sitting on top of your raw water intake. The pigment reads the same either way.

Two different things measured off two different signals

The cyanobacteria index, usually called CI, was built specifically to get around that blind spot. It comes out of ocean-color satellite work (NOAA's version runs off the same sensor family used for MERIS and now OLCI) and it targets the reflectance signature tied to phycocyanin, a pigment that's specific to cyanobacteria rather than algae broadly. Instead of giving you a biomass number like chlorophyll-a does, CI is built as a bloom-detection flag: it's tuned to pick out the spectral fingerprint cyanobacteria scums leave on the water surface, distinct from the general green signal every other phytoplankton group also produces.

That's the core distinction. Chlorophyll-a answers "how much algae is out there." CI answers "is what's out there cyanobacteria, specifically the group that can produce microcystin, anatoxin, or cylindrospermopsin." You can have high chlorophyll-a and low CI on the same day, and that's not a contradiction. It's two different sensors looking for two different things.

Why the distinction matters at the intake

For a reservoir manager, this isn't an academic point. A chlorophyll-a trend line alone will flag every green water event your reservoir has, including the benign ones, and if you're calibrating intake timing or public notice thresholds off chlorophyll-a alone you'll end up chasing a lot of false alarms, or worse, getting desensitized to the readings because so many of them turn out to be nothing. CI narrows that down to the signature that lines up with the organism you're worried about. It's still not a toxin measurement. Neither CI nor chlorophyll-a tells you a microcystin concentration; that still comes from a grab sample and an ELISA or LC-MS/MS run at the lab. What CI gives you is lead time on where to point that sampling effort, and which part of the reservoir to watch as a bloom patch moves.

Most of the CI literature and NOAA's own operational product were developed and validated against big, open lakes like Erie and Okeechobee, where there's enough fetch and surface area for the satellite pixel resolution to work cleanly. A lot of drinking water reservoirs are smaller and narrower than that, with coves and intake arms that don't always behave the same way optically. That's part of why a lot of utilities end up watching the spectral signature on their own reservoir through a dedicated pass rather than relying on a national-scale bulletin tuned for much bigger water bodies.

That's the gap Algal Bloom Warning is built around: a daily-in-season read on your specific reservoir that flags bloom extent by its spectral signature, with a short trend note so you can see whether a patch is holding, growing, or moving toward the intake, before you're relying on a phone call from someone standing at the shoreline.

If you're trying to get more lead time between first bloom formation and the decision to adjust intake timing or issue a notice, that daily pass is worth a look.

Get started

← Back to the blog